News

Contact Us

CCID Conference&Exhibition Co.,Ltd
Tel:+86 10 88558131
E-mail:info@chinawind.org.cn

News

Denmark pavilion will be unveiled at CWP2024

From October 16th to 18th, China Wind Power 2024 (CWP2024), an event for global wind power industry, will be held in Beijing.




Denmark Pavilion – The Pavilion Powered by Denmark, which has been a part of China Wind Power since its inception, will continue to show up at CWP2024 featuring 18 world's leading Danish wind companies. 



The Pavilion/ Danish Energy Export  

 Booth Number:W1-D02-01-A


Danish Energy Export is your direct access to a unique network of Danish key suppliers and experts comprising the entire Danish wind power supply chain.


Visit The Pavilion - Powered by Denmark for a firsthand impression of a range of the Danish companies. Together we find the best solutions for you.


Trusted A/S 

 Booth Number:W1-D02-01-B


Monitor conditions of freight, special transports, and sensitive installations. Get data on impacts, handling or relative humidity levels. Document safe operations or get full overview of assets. 


Trusted offers full 24/7 access to your data on the Trusted Data Portal and Trusted Data App for visualization and data analytics. Download PDF reports for compliance, get instant alarms if thresholds are exceeded, store data in device memory when outside GSM network coverage.


The Trusted solution is made possible through our wireless data tracking hardware with built-in sensors (GPS, accelerometer, RHT, light) for digital fleet management and condition monitoring of important assets globally.


Mirka Trading (Shanghai) Co., Ltd  

Booth Number:W1-D02-01-C


Mirka is focused on providing the best tools and solutions to both surface finishing and the precision industry. We work hard to conserve energy and raw materials, reduce waste, increase recycling, and decrease the use of persistent chemicals. We develop healthier, safer, and more efficient products and processes for our customers and employees. We are the pioneers in dust-free sanding, setting a new industry standard with our products and concepts that also reduce the stress on the environment. Our award-winning, easy-to-use and ergonomic tools are powerful and smooth, yet the lightest on the market, giving you faster results and consistent quality.


Flex Trim A/S  

Booth Number:W1-D02-02


Flex Trim A/S is developing, manufacturing sanding solutions for more than 25 years based on a patented brush sanding technology.


Since 2004 solutions have been provided to the wind industry being an integral part of the production of thousands of blades worldwide. 


The systems provide sanding, surface preparation and surface activation to composite surfaces.


Flex Trim benefits:

• Reduced sanding cost

• Faster Process times – up to 25 times faster

• HSE improvement

• No HAVS, Hand Arm Vibration Symptoms

• Less dust hazards, due to low rotation speed

• Improved and uniform surface quality

• Optimized production and working environment

• Longer abrasive lifetime

• Reduced labor-costs

• Customized solutions – counselling and services


C.C. Jensen A/S

Booth Number:W1-D02-03


Improve Your WTG Lost Production Factor!


C.C.JENSEN designs and manufactures CJCTM Oil Filtration Systems for removal of particles, water, acid and oil degradation products from oil and other fluids.


CJCTM OIL Fine Filters constantly remove particles, water and oxidation from oil resulting in reduced gearbox wear, improving your up-time.


CJCTM Flushing Unit certifies the oil cleanliness of your gearbox.


CJCTM Oil Contamination Monitor, OCM 15X performs remote oil condition monitoring of wear generation in gearboxes, allowing you to plan ahead and improve your ROI.


Predict-Prevent-Profit!


Klingspor A/S  

Booth Number:W1-D02-04


In a rapid growing industrial landscape, the pursuit of enhanced productivity, minimized re-work, and optimized TAKT-time has never been more crucial. Klingspor Windpower is a global process partner delivering recognized sanding solutions supporting your needs.


Hoyer Motors  

Booth Number:W1-D02-05


Hoyer is a value-adding supply chain partner for electric motors. Through strong partnerships with leading OEMs, system integrators, and distributors, we offer a unique setup and valuable market insights.


Our approach to wind market is to focus on selected niche areas such as hydraulic and cooling applications for onshore and offshore turbines. Our motors for wind turbines combine customised solutions with product consistency, ensuring market-leading delivery performance—avoiding unnecessary downtime and reducing costs.


With headquarters in Denmark and China, we provide a global approach with a local footprint. At Hoyer, we are committed to being your “Green Transition Wind Partner.“


Multi-Wing(Suzhou)Co.,Ltd  

Booth Number:W1-D02-06


Multi-Wing® - The world’s leading manufacturer of axial flow fans.


For almost 80 years Multi-Wing has provided tailor-made axial fan solutions in our primary markets: radiators and engine cooling, ventilation and refrigeration. Almost three generations of design, testing and expertise across a spectrum of applications have made Multi-Wing the recognized leader in axial-flow fans.


Multi-Wing combines superior engineering, outstanding customer service and an unparalleled attention to detail in production to provide the best product in the industrial fan business. We will ensure that your custom fan selection is built to perform and delivered when you need it.


NIBE Element Wind Solutions 

Booth Number:W1-D02-07


NIBE Element Wind Solutions:


Heating equipment for cold climate.Electrical heating, resistors and measurement for wind turbine applications.Production facilities in Asia, Europe, Americas.


Products – for heating of nacelle – electrical cabinets – blades – towers – hydraulic systems etc.Customized air heaters with UL approval. approval.Electrical cabinet heaters.Heating blankets.Heaters for gearbox with UL approval.High flexible silicone heating elements.Dump load resistors.


Svendborg Brakes Aps, Regal Rexnord  

Booth Number:W1-D02-08


Svendborg Brakes, Jaure, Tollok and Centa, are all part of Regal Rexnord, and collectively support the global wind market.


We are the innovators & pioneers of hydraulic yaw & rotor brake configurations. The Svendborg Brakes engineers are also the brains behind groundbreaking service tools for yaw discs & yaw brakes. For decades, we have successfully handled Wind projects from few KW onshore to the largest MW offshore installations, and our products and original parts have been used safely and successfully worldwide. All is further strengthened by our expert Service Technicians who go anywhere their expertise is needed! Svendborg Brakes also has manufacturing facilities in China.


Liftra Aps

Booth Number:W1-D02-09


Liftra is a global corporation recognized by the international wind turbine industry as a specialist within lifting and transportation solutions. Liftra designs, engineers and manufactures tailor-made solutions to enable more sustainable, time and cost efficient wind turbine installation and maintenance for onshore and offshore locations. With more than 20 years of experience and more than 500 skilled professionals Liftra brings high quality equipment and services to the wind energy sector, striving to push boundaries and set new standards that can lower the cost of green energy.


Our product portfolio includes the innovative Liftra Self-Hoisting Crane, and the LT1500 Installation Crane.


Resolux Group 

Booth Number:W1-D02-10


Resolux Group one stop supply chain tower & nacelle internals, a specialist in kitting for tower & nacelle with a wide scope incl. light kit, cable fabrication, junction & switch boxes, cable ladders & trays, hoist and hoist disconnect kit, have in-house design & development, are active in on/off-shore.


Gexpro Services is a world class supply chain solutions provider supporting several major OEM's and their Tier 1 suppliers with custom fabrication, high strength hardware, electrical assemblies, and other C-parts, has recently acquired and formed partnership with Resolux and Frontier Technologies. Frontier is a high-end design and manufacturing company.


Nissens Cooling Solutions 

Booth Number:W1-D02-11-A


Nissens Cooling Solutions, founded in Denmark in 1921, is a renowned, international manufacturer of customized cooling solutions for the renewables and on- & off-road industry segments. With more than 100 years of experience in thermal management, including over 30 years in the Windpower market, we combine product innovation and reliability to support our customers in achieving their net zero targets. Today, as part of the KK Wind Solutions and A.P. Moller Group, we continue to lead the green energy transition by delivering cutting-edge cooling solutions that enhance efficiency, sustainability, and the long-term growth of renewable energy.


KK Wind Solutions  

Booth Number:W1-D02-11-BKK


A leading partner in electro-mechanical systems. Decades of experience delivering electrical for wind turbines and renewables has taught us all about the complexities of these dynamic industries. We innovate to integrate: Our expertise with system integration and our ability to provide integrated supply chain solutions sets us apart from others. We work in collaboration with our customers to achieve the greatest possible impacts: a more competitive renewables industry and a meaningful contribution to global sustainability. Today, KK Wind Solutions is a part of the A.P. Moller Group as we continue to lead the green energy transition


Duelco A/S  

Booth Number:W1-D02-12-A


Duelco offers development, sales, and distribution of solutions within electrical and automation equipment for industry, installation, hospitals, infrastructure, and renewable energy.


We understand that every customer and every project is unique, which often requires an individual approach and special solutions.Our approach to special solutions starts and ends with the customer at the center. We listen carefully and dive deep into each customer's specific needs and challenges.


Our experts handpick and transform our standard products or develop special solutions to develop a product solution that exactly match the customer's request and problem.


Danish Pavilion-Hans Følsgaard A/S  

Booth Number:W1-D02-12-B


Our specialists realize the full potential of sustainable energy. We deliver the best practical solutions by identifying, designing, realizing and integrating all potential opportunities. We have roots in Denmark, which has a global position of strength in the green transition climate goals. This gives us and among the world's most ambitious strong foundation, combined with extensive experience and collaboration with the world's leading companies and manufacturers in the green energy industry. Through us, customers have one single point of contact with a holistic view of all possibilities -whether the ideal solution is customized or standardized.


NIEBUHR GEARS A/S  

Booth Number:W1-D02-13


Niebuhr Gears is the world´s biggest manufacturer of yaw rings for wind turbines.


We produce western quality, ensuring with low cost - all manufacturing processes in house.


We have been delivering yawrings for more than 40 years. First yawring was produced in 1979 to Vestas, and we have had a partnership since then.


Niebuhr Gears has factories in Wuqing (Tianjin) China and Denmark (Europe).


The footprints ensure that we can deliver globally to western OEM´s and chinese OEM´s at attractive prices.


Aluwind 

Booth Number:W1-D02-14


ALUWIND designs and produces aluminum structures for onshore and offshore wind power, such as platforms, railings, TP covers, doors and gates, galleries, guardrails, stairs and dampers. Besides aluminum, we are capable of utilizing steel for projects requiring enhanced strength and durability. Our expertise in both materials allows us to deliver tailored solutions that meet the demanding conditions of offshore environments. We focus on cost-efficient design, mass production, and standardization supports the offshore sector.


With production, logistics, and sales locations in Europe and Asia, we offer full local production, design, and sales service to support global wind power manufacturers.


Windar Photonics 

Booth Number:W1-D02-15


Windar Photonics will be displaying the latest WindEYE, WindVISION and various new applicaitons.


WindEYE mostly used for retrofit market will help the IPPs to gain more power by better aligning the turbines, reducing the alarms and etc. The WindTIMIZER is compatible with most turbine type, allowings us to complete the retrofit without making any changes to the existing algorithms.


The new Nexus platform can provide localized LIDAR monitoring and control solution.


WindVISION™ is mainly used in the wind turbine design phase to achieve load optimization. Through complete yaw and pitch optimization, it helps the wind turbine reduce the load caused by gusts, turbulence, wind shear, wake.